walkerbas.blogg.se - Vectric forum electronic tool touch off

Vectric forum electronic tool touch off pdf#
Vectric forum electronic tool touch off software#

This section gives choice between horizontal and vertical flipping when changing machining side. This option allows the datum position to be set to a value other than X0, Y0. While this form is open, a red square is drawn in the 2d view to highlight the datum's position. This represents the location, relative to your design, that will match the machine tool when it is positioned at X0, Y0. This datum can be set at any corner, or the middle of the job. This option allows Z Zero to reference the same physical location, regardless whether material is flipped or not XY Datum Position Indicates whether the tip of the tool is set off the surface of the material (as shown in the diagram) or off the bed / table of the machine for Z = 0.0. You can cut jobs larger than this limit but you will need to use the Toolpath Tiling feature to cut the job in sections. VCarve Desktop only supports job sizes up to a maximum of 25 inches square without tiling. See the Sketchup section for detailed instructions on importing Sketchup files. SKP extension (see can be imported as 2D data suitable for machining.

Vectric forum electronic tool touch off pdf#

When importing multiple page PDF documents each page is placed on a separate layer.

The text and vector content of PDF files is extracted when imported into VCarve Desktop.

Vectric forum electronic tool touch off software#

Software such as the Adobe product range can be used to convert files from other design and word processing software into the industry standard PDF file format. The AI file will be placed with the lower left corner of the design at X0, Y0 The Job Setup form will automatically be opened so the required material size can be specified. By default the EPS file will be placed with the lower left corner of the design at X0, Y0.įiles from typical design software such as Adobe Illustrator and Corel Draw can be opened. The actual size of the material can then be specified along with the required thickness and appropriate X0, Y0 and Z0 origins.įiles from typical design software such as Corel Draw can be opened. The Job Setup Form is automatically opened showing the maximum X and Y dimensions of the opened design. All calculated toolpaths are stored/opened from the CRV file.įiles from other CAD or graphics software packages such as AutoCAD will be opened in the original size and position. All calculated toolpaths are stored/opened from the CRV3D file.įiles previously created and saved in VCarve Desktop will be opened and displayed in the 2D Design window. Simple Rotary Modelling using 2D Toolpathsįiles previously created and saved in VCarve Desktop will be opened and displayed in the 2D Design window and 3D View if they contain 3D data.Importing External Models in a Rotary Project.Save All Visible Toolpaths as a Template.

Import 3D Model into Single or Two Sided Job.

Create Vector Boundary From Selected Components.

Join / Close Vector with a Straight Line.

Join / Close Vector with a Smooth Curve.

Employment Opportunity / RFQ (Request for Quote).

The setting procedures are in any Okuma manual, you should probably read the setting procedure at least, or better, the entire manual. Take a skim off the material diameter, measure it then on the same offset screen, move to X, press CAL, type a number (your measured diameter) and press WRITE. Press CAL and type a number (generally it will be 0) and press WRITE Go to the Tool Offset screen, move the cursor to the tool number you want to set then across to Z. Move the tool to the Z zero or any known Z position (the Z0 position is ideal) that tool is now set (Z is 0 and X was calculated)įor other tools, index the turret to an unset tool. Using the same tool that you set the work zero with, for X, take a skim off the material, measure it then on the same offset screen, move to X, press CAL, type the number (your measured diameter) and press WRITE. You can set the geometry offset just like any Fanuc system. The setter will only work properly if it is calibrated and that is a big hassle to do, especially if you don't even know the basics of tool setting or machine operation. Once tools are set you can just go to the Zero Set screen and set your zero (move tool, CAL 0 WRITE) This is for a new machine where nothing is set. Now move your tool to the zero point (it can be anywhere you want), go to the Zero Set screen, move the cursor to the Z, press CAL, type a number where you want your zero to be and press WRITE. To set the Z workshift, first go to the tool offset screen and set the tool geometry manually to 0 by pressing SET 0 WRITE for all tools.